CIChannel.CountEdgesHysteresis Property
- Updated2023-02-21
- 1 minute(s) read
CIChannelCountEdgesHysteresis Property
Specifies a hysteresis level to apply to CountEdgesThresholdVoltage. When CountEdgesActiveEdge is rising, the source signal must first fall below CountEdgesThresholdVoltage minus the hysteresis before a rising edge is detected at CountEdgesThresholdVoltage. When CountEdgesActiveEdge is falling, the source signal must first rise above CountEdgesThresholdVoltage plus the hysteresis before a falling edge is detected at CountEdgesThresholdVoltage.
Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302
Syntax
public double CountEdgesHysteresis { get; set; }
Public Property CountEdgesHysteresis As Double Get Set
Property Value
Type: DoubleSpecifies a hysteresis level to apply to CountEdgesThresholdVoltage. When CountEdgesActiveEdge is rising, the source signal must first fall below CountEdgesThresholdVoltage minus the hysteresis before a rising edge is detected at CountEdgesThresholdVoltage. When CountEdgesActiveEdge is falling, the source signal must first rise above CountEdgesThresholdVoltage plus the hysteresis before a falling edge is detected at CountEdgesThresholdVoltage.
Exceptions
| Exception | Condition |
|---|---|
| DaqException | The NI-DAQmx driver returned an error. |