ExternalCalibrationSession.Setup1112 Method
- Updated2023-02-21
- 1 minute(s) read
ExternalCalibrationSessionSetup1112 Method
Configures the calibration task for an SCXI-1112 module.
Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302
Syntax
public void Setup1112( string physicalChannels )
Public Sub Setup1112 ( physicalChannels As String )
Parameters
- physicalChannels
- Type: SystemString
The physical channel(s) to calibrate.
Exceptions
| Exception | Condition |
|---|---|
| DaqException | The NI-DAQmx driver returned an error. |
Remarks
You can measure calibration input and output points by supplying reference signals to the specified channel and measuring the outputs.
 Note |
|---|
| The terminal on which to measure module output depends on the configuration of the module in MAX. National Instruments recommends cabling the module to the digitizer so that the output appears on the MCH0± pins of the rear signal connector. Refer to the SCXI-1112 User Manual for more information on the routing of module output. |