DigitalMultiChannelReader.BeginReadMultiSamplePortUInt32 Method
- Updated2023-02-21
- 2 minute(s) read
DigitalMultiChannelReaderBeginReadMultiSamplePortUInt32 Method
Begins an asynchronous read of one or more 32-bit unsigned integer samples from one or more DIChannel objects in a task.
Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302
Syntax
public IAsyncResult BeginReadMultiSamplePortUInt32( int samplesPerChannel, AsyncCallback callback, Object state )
Public Function BeginReadMultiSamplePortUInt32 ( samplesPerChannel As Integer, callback As AsyncCallback, state As Object ) As IAsyncResult
Parameters
- samplesPerChannel
- Type: SystemInt32
The number of samples to read. If you set samplesPerChannel to -1 for a continuous acquisition, the read retrieves all samples available in the buffer at the time of the read. If you set samplesPerChannel to -1 for a finite acquisition, the read behavior is set by the ReadAllAvailableSamples property of the DaqStream you are reading from. - callback
- Type: SystemAsyncCallback
An optional asynchronous callback that is called when the read is complete. Specify if you do not want a callback when the read is complete. - state
- Type: SystemObject
A user-provided object that distinguishes this asynchronous read request from other requests. Use this parameter to provide information to the callback. Specify if you do not need to pass any additional information to the callback.
Return Value
Type: IAsyncResultAn IAsyncResult that represents the asynchronous call.
Remarks
To get the read data or any exceptions that occurred during an asynchronous read initiated with BeginReadMultiSamplePortUInt32(Int32, AsyncCallback, Object), call EndReadMultiSamplePortUInt32(IAsyncResult) with the returned IAsyncResult.
Use this method for devices with up to 32 lines per port.
NI-DAQmx read and write methods time out after the amount of time specified by the Timeout property on the task you are reading from or writing to.
Refer to NI-DAQmx Readers and Writers for more information about memory limitations in NI-DAQmx read methods.
 Note |
|---|
| Refer to Asynchronous Reads and Writes for additional information. |