CounterSingleChannelReader.ReadMultiSamplePulseTicks Method

Download PDF

CounterSingleChannelReaderReadMultiSamplePulseTicks Method

Reads one or more pulse samples in terms of ticks from a counter task.

Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

public CIDataTicks[] ReadMultiSamplePulseTicks(
	int numberOfSamples
)

Public Function ReadMultiSamplePulseTicks ( 
	numberOfSamples As Integer
) As CIDataTicks()

numberOfSamples: Type: SystemInt32
The number of samples to read. If you set numberOfSamples to -1 for a continuous acquisition, the read retrieves all samples available in the buffer at the time of the read. If you set numberOfSamples to -1 for a finite acquisition, the read behavior is set by the ReadAllAvailableSamples property of the DaqStream you are reading from.

Type: CIDataTicks
A 1D array of pulse samples in terms of ticks from the task. Each element of the array corresponds to a sample from the task.

Exception	Condition
DaqException	The NI-DAQmx driver returned an error.
OutOfMemoryException	There is not enough memory to carry out this operation.

NI-DAQmx read and write methods time out after the amount of time specified by the Timeout property on the task you are reading from or writing to.

Refer to NI-DAQmx Readers and Writers for more information about memory limitations in NI-DAQmx read methods.