RFmxSpecAnMXAmpmConfiguration.ConfigureReferenceWaveform Method
- Updated2024-07-17
- 1 minute(s) read
RFmx
Configures the reference waveform and its properties for the AMPM measurement.
Namespace: NationalInstruments.RFmx.SpecAnMX
Assembly: NationalInstruments.RFmx.SpecAnMX.Fx40 (in NationalInstruments.RFmx.SpecAnMX.Fx40.dll) Version: 24.5.0.49286 (24.5.0.49286)
Syntax
public int ConfigureReferenceWaveform( string selectorString, ComplexWaveform<ComplexSingle> referenceWaveform, RFmxSpecAnMXAmpmReferenceWaveformIdleDurationPresent idleDurationPresent, RFmxSpecAnMXAmpmSignalType signalType )
Public Function ConfigureReferenceWaveform ( selectorString As String, referenceWaveform As ComplexWaveform(Of ComplexSingle), idleDurationPresent As RFmxSpecAnMXAmpmReferenceWaveformIdleDurationPresent, signalType As RFmxSpecAnMXAmpmSignalType ) As Integer
Parameters
- selectorString String
- Pass an empty string. The signal name that is passed when creating the signal configuration is used.
- referenceWaveform ComplexWaveformComplexSingle
- Specifies the complex baseband equivalent of the RF signal applied at the input port of the device under test when performing the measurement.
- idleDurationPresent RFmxSpecAnMXAmpmReferenceWaveformIdleDurationPresent
- Specifies whether the reference waveform contains an idle duration.
- signalType RFmxSpecAnMXAmpmSignalType
- Specifies whether the reference waveform is a modulated signal or tones.
Return Value
Int32Returns the status code of this method. The status code either indicates success or describes an error or warning condition.
Remarks
This method maps to the RFmxSpecAn_AMPMCfgReferenceWaveform() function in C.