If you are trying to create a custom DAQ cable, create a custom fixture or breakout, modify an existing cable, repair or replace the connector on your cable or printed circuit board (PCB), or require replacement jackscrews or jacksocket fasteners, this document provides descriptions, part numbers, and vendor information to achieve these tasks.
This guide is intended to cover connectors, backshells, screws and washers designed for use with NI DAQ devices. It does not explicitly cover other NI product families such as HSDIO, Switches, C Series, or reconfigurable I/O (formerly R Series), although some models may use similar or the same parts. It also does not cover legacy or End of Life (EOL) parts or products.
These connectors or receptors are found on most NI DAQ devices. Refer to the Glossary for any questions regarding connector terminology.
Check out the Popular NI DAQ Models and their Connectors section, the DAQ Accessory Guide, the DAQ Cable Guide, or the product manual for your product for more information on what connector is featured on your device. Additionally, NI Dimensional Drawings contains drawings for many connectors and the devices, modules, cables and accessories they are used on.
Notes:
Part Description | NI Orderable Part Number | Manufacturer Part Number |
---|---|---|
0.8 mm VHDCI Board-Mount Connectors | ||
68-Position Right Angle Single Stack PCB-Mount VHDCI (Receptacle) | 785633-01 | Honda HDRA-EC68LFDT2+ |
68-Position Right Angle Dual Stack PCB-Mount VHDCI (Receptacle) | 785634-01 | Honda HDRA-E68W1LFDT1EA+ |
68-Position Vertical Single Stack PCB-Mount VHDCI (Receptacle) | 785753-01 | Honda HDRA-EC68FDT+ |
50-Position Right Angle PCB-Mount VHDCI (Receptacle) | N/A | TE Connectivity 5787096-1 |
0.8 mm VHDCI Cable Connectors | ||
68-Position Offset IDC Cable Connector (Plug) (SHC68-*) | N/A | Molex 71425-300111 |
50-Position Offset IDC Cable Connector (Plug) | N/A | TE Connectivity 5787131-1 |
68-Position 0.050 D-Type Board-Mount Connectors | ||
68-Position Right Angle PCB-Mount Connector (Male) | 777600-01 | TE Connectivity 2-5174225-5 |
68-Position Vertical PCB-Mount Connector (Male) | 777601-01 | TE Connectivity 2-5174339-5 |
68-Position 0.050 D-Type Cable Connectors | ||
68-Position IDC-Type Connector (Female) | N/A | TE Connectivity 5749699-7 |
Backshell for 68-Position IDC-Type Connector (Female) | N/A | TE Connectivity 5749195-2 |
NI 68-Position Kit including Solder-Cup Connector (Female) and Backshell, and Jackscrews | 776832-01 | N/A. NI kit contains the Honda solder-cup connector and backshell, below. |
68-Position Solder-Cup Connector (Female) | N/A | Honda PCS-E68FS+ |
Backshell for 68-Position Solder-Cup Connector (Female), and Jackscrews | N/A | Honda PCS-E68LKAU2N |
100-Position 0.050 D-Type Board-Mount Connectors | ||
100-Position Right Angle PCB-Mount Connector (Female) | 777778-01 | TE Connectivity 5787169-9 |
100-Position Vertical PCB-Mount Connector (Female) | 777779-01 | TE Connectivity 5749070-9 |
100-Position 0.050 D-Type Cable Connectors | ||
100-Position IDC-Type Connector (Male) | N/A | TE Connectivity 5749111-8 |
Backshell for 100-Position IDC-Type Connector (Male), includes Jackscrews | N/A | TE Connectivity 5749081-1 |
37-Position D-Sub Cable Connectors | ||
NI 37-Position Kit including Solder-Cup Connector (Female) and Backshell, no Jackscrews | 779184-01 | N/A |
Backshell for 37-Position Solder-Cup Connector (Female). Is a 62-position backshell that also fits 37-position Solder-Cup connector. | N/A | TE Connectivity 5206478-4 |
37-Position Solder-Cup Connector (Male), 5 Amp | N/A | L-com SD37P |
37-Position Solder-Cup Connector (Male), 3 Amp | N/A | Surplus Electronic Technology 010337-00002230 |
1This product is currently in the maintenance phase. For more information see NI Hardware Product Life Cycle Policies.
To provide a more secure cable attachment, NI now uses jackscrews to secure 68-pin cables to DAQ devices and accessories. Each side of the cable connector contains two jackscrews that tighten into jacksockets located on all DAQ devices and accessories. To make this conversion, use the Jacksocket Kit for Connecting Screw Latching Cables in the following table. Other replacement jackscrew, jacksocket, screwlock, thumbscrew and washer information is also provided.
Part Description | NI Orderable Part Number | Manufacturer Part Number |
---|---|---|
Latching Cable to Jackscrew Conversion Kit | ||
(1) 4 Piece Jacksocket Kit for Connecting Screw Latching Cables | N/A | N/A |
(10) 4 Piece Jacksocket Kits for Connecting Screw Latching Cables | N/A | N/A |
Replacement Screws and Washers | ||
68-Position SCSI-II Jackscrew, Molded Head, Overmold; 2-56 Threads | N/A | Custom |
68-Position SCSI-II Jacksocket, M2.5 Screw, .348" Length, .148" Head Length | N/A | Custom |
68-Position VHDCI Connector Screwlock, Board Mount, Nylon Patched | N/A | TE Connectivity 787004-3 |
100-Position SCSI-II Jackscrew, Molded Head, Overmold, 2-56 Threads | N/A | Custom |
100-Position SCSI-II Jacksocket, 2-56 Threads | N/A | N/A |
68 or 100-Position SCSI Connector Washers, M2.5, Flat, .030 Thick, SS | N/A | N/A |
37-Position D-Sub Standoff/Screwlock, 4-40 Threads, 3/16" Hex Head, 3/16" Head Length, 5/16" Thread Length, 0.13" Min Female Depth, SS, Threads Fully Nylon Patched | N/A | Custom |
37-Position Thumbscrew, 4-40 threads, 46.9mm Long, For High Voltage Cables | N/A | Custom |
For more information on any of the listed NI orderable parts, please visit http://www.ni.com/contact-us/ to contact an NI representative. NI orderable parts listed in this guide without a product page can still be purchased by contacting NI.
For parts with a manufacturer part number, please contact the manufacturer or their vendors for further information about the product and purchasing. Manufacturer part numbers represent functionally equivalent replacements that are currently available from the specified manufacturer. This may differ from the part found on your device, module, cable or accessory as NI continuously revises and improves their products.
Some parts are custom made for NI or are common parts in industry, and do not have orderable part numbers. Please use the specifications provided to find an appropriate part.
Below is a list of the connectors referenced in this guide that are found on the most popular NI DAQ products. This is not intended to be a complete nor comprehensive list of all NI DAQ products. Similar cables and connectors may be used with other NI products, and are not included here. You should first check your device's manual, or reference the NI DAQ Cable and Accessory Compatibility Guide to ensure you are referencing the right connector for your device or module.
Note: These tables do not indicate compatibility between devices, modules, cables and accessories. Although they may share the same connector type, different wire mappings are used in different configurations.
Devices/Modules | Connector Types |
---|---|
X Series (63xx) | 68-position 0.8mm VHDCI |
M Series (62xx) | 68-position 0.8mm VHDCI 68-position 0.050 D-Type 37-position D-Sub |
S Series (61xx) | 68-position 0.8mm VHDCI 68-position 0.050 D-Type 37-position D-Sub |
E Series (60xxE) | 100-position 0.050 D-Type 68-position 0.8mm VHDCI 68-position 0.050 D-Type |
Analog Output (67xx) | 68-position 0.8mm VHDCI 68-position 0.050 D-Type |
Counter/Timer (66xx) | 100-position 0.050 D-Type 68-position 0.050 D-Type |
Digital I/O (650x, 651x, 652x) | 100-position 0.050 D-Type 37-position D-Sub |
Cables | Connector Types |
---|---|
SHC68-68-EPM1 SH68‑C68‑S1 SHC68-681 RC68-681 | 68-position 0.8mm VHDCI 68-position 0.050 D-Type |
SH68‑68‑EPM SH68‑68R1‑EP SH68-68-D1 R68-68 | 68-position 0.050 D-Type |
DB37M‑DB37F‑EP SH37F‑37M SH37F-P-4 | 37-position D-Sub |
SH100M-100M Flex2 | 100-position 0.050 D-Type |
1These cables include the 68-pin .8mm VHDCI connector on the end to be connected to the module or device and the 68-pin 0.050 D-Type connector on the end to be connected to the accessory.
2 The SH100M-100M Flex cable was formerly named SH100-100-F.
Accessories | Connector Types |
---|---|
CB‑68LP BNC-2110 | 68-position 0.050 D-Type |
CB‑37FV CB‑37FH CB‑37F‑LP CB‑37F‑HVD | 37-position D-Sub |
SCB-100 SCB-100A | 100-position 0.050 D-Type |