You can add your current or voltage output to the project by configuring signals in the Channel Specification. Configure current or voltage generation by enabling the channel and determining the output settings.

  1. Select one or more channels you wish to configure.
  2. Hover over a channel row and click the Configure gear .

    The configure gear appears only when selecting multiple channels of the same data type. Data types include analog, digital, counter, and calculated. If channels of different data types are selected, the configure gear will not appear.

  3. Optional: Specify the channel name in the Name field.
  4. Select Current or Voltage from the Physical Generation drop-down menu.
    Note Available output options vary by device.
  5. If applicable, specify the output Value for the channel or map to an input channel Source to use as the channel output.
    Note FlexLogger does not support waveform output. Output signals are software timed and nondeterministic.
  6. If applicable, specify the Signal Range minimum and maximum.
  7. Apply any additional applicable configuration options to the output. Refer to Configuring I/O Channels for more information on available options.
    Note FlexLogger does not log output channels.