Onboard Signal Processing:DDC:Data Processing Mode Property
- Updated2023-02-21
- 1 minute(s) read
Onboard Signal Processing:DDC:Data Processing Mode Property
Short Name: Data Processing Mode
Property of niScope
The way in which data is processed by the DDC block. The default value is Complex.
 |
Note This property can be used only with high-speed digitizers that support onboard signal processing (OSP). NI-SCOPE returns an error if you use this property with a device that does not support OSP. |
| Real (0) |
The waveform data points are real numbers (I data). |
| Complex (1) |
The waveform data points are complex numbers (IQ data). |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Channel-based | No |
| Resettable | No |