Uninstalling the Hardware

Notice Disconnect or disable any external RF, clock, or digital connections to the device front panel. Applying external signals while the device is powered off may cause damage.
Notice Do not disconnect the cable that connects CAL IN to CAL OUT. Removing the cable from or tampering with the CAL IN or CAL OUT front panel connectors voids the product calibration and specifications are no longer warranted.
  1. Power off the chassis.
  2. Ground yourself with a grounding strap or touch a grounded metal surface.
  3. Disconnect any cables from the module front panel connectors.
  4. Unlatch the module by pushing down on the ejector handle.
  5. Pull the ejector handle and hold the module by the edges to remove it from the chassis.
Store the module in the original antistatic packaging when not in use to avoid damage.