Results
PXIe-5644/5645 FPGA I/O Resources
The following tables describe LabVIEW FPGA I/O resources visible in the LabVIEW project.
- 5 minute(s) read
- Last Updated2023-07-20
- Manual: NI RF Vector Signal Transceivers Help
PXIe-5646 FPGA I/O Resources
The following tables describe LabVIEW FPGA I/O resources visible in the LabVIEW project.
- 4 minute(s) read
- Last Updated2023-07-20
- Manual: NI RF Vector Signal Transceivers Help
PXIe-5820 FPGA I/O Resources
The following tables describe LabVIEW FPGA I/O resources visible in the LabVIEW project.
- 5 minute(s) read
- Last Updated2023-07-20
- Manual: NI RF Vector Signal Transceivers Help
PXIe-5840 FPGA I/O Resources
The following tables describe LabVIEW FPGA I/O resources visible in the LabVIEW project.
- 5 minute(s) read
- Last Updated2023-07-20
- Manual: NI RF Vector Signal Transceivers Help
Configuration Overview
The Configuration instrument design library provides functionality to configure hardware settings and to check if the hardware is operating correctly.
- 2 minute(s) read
- Last Updated2023-07-20
- Manual: NI RF Vector Signal Transceivers Help
Configuring the Hardware in MAX
Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which devices reside in the system and how they are configured. MAX is automatically installed with the instrument design libraries and NI-RFSA and NI-RFSG.
- 1 minute read
- Last Updated2023-07-20
- Manual: NI RF Vector Signal Transceivers Help
Configuring the Subsystems
To configure the different hardware subsystems of your device, complete the following steps.
- 3 minute(s) read
- Last Updated2023-07-20
- Manual: NI RF Vector Signal Transceivers Help
Creating a RIO Alias for a VST Device
MAX allows you to create an alias for each VST device. The alias is used in the instrument design libraries to operate the hardware resources. You are not required to create a RIO alias, but doing so can make programming...
- 1 minute read
- Last Updated2023-07-20
- Manual: NI RF Vector Signal Transceivers Help
Digital Signal Processing (DSP) Overview
Use this instrument design library to digitally process I/Q data. This instrument design library contains LabVIEW FPGA VIs. These VIs contain functionality that is typically found in digital downconverters (DDCs) and digital upconverters (DUCs). These VIs also perform DSP for...
- 1 minute read
- Last Updated2023-07-20
- Manual: NI RF Vector Signal Transceivers Help
Embedded Configuration Block Overview
Use the Embedded Configuration Block (ECB) instrument design library to store multiple hardware configurations in onboard memory and recall them from the FPGA.
- 2 minute(s) read
- Last Updated2023-07-20
- Manual: NI RF Vector Signal Transceivers Help