Smooth with 4253H Filter
- Updated2024-09-12
- 2 minute(s) read
DIAdem ANALYSIS > Curve Fitting > Smooth with 4253H Filter
Smooth with 4253H Filter
Smoothes a data channel using the 4253H filter. The 4253H filter applies several smoothing in succession, resulting in a smooth signal, but with essential structures still visible.
Settings
| Channel | Specifies which data channel DIAdem smooths. |
| Smoothing with 4253H Twice Filter / Smoothing with 4253H Filter | Specifies whether DIAdem uses the 4253H Twice filter or the 4253H filter. |
| Store result in original channel | Overwrites the values of the input channels. Do not select this setting if you want to continue using the input channels. |
 | If you want to use waveform channels in this dialog box, follow Rule 2.2 for Calculating with Waveform Channels. |
Result
DIAdem generates a result channel with the smoothed values.
 | Refer to the Help page Smoothing Functions for further information. |
 | To calculate quantity-based in DIAdem, click the Calculate Quantity-Based button on the DIAdem ANALYSIS toolbar. When executing quantity-based calculations, DIAdem checks whether the program can also execute calculations on physical quantities in the same calculation. If DIAdem cannot execute the calculation because the physical quantities are unsuitable, the program displays an error message. Refer to the Help page Calculating Quantity-Based and Non-Quantity-Based in DIAdem for the conditions and rules for quantity-based calculations. |
Script Call
Call SUDDlgShow("Main", ResourceDrv & "AnaChnSmooth4253H")