Repair
- Updated2024-10-21
- 2 minute(s) read
Repair
Optional replacement components are available from NI. The following table lists available components and their orderable part numbers.
Caution Disconnect the product from its power source before performing
maintenance and repair procedures.
Attention Débranchez le produit de sa
source d’alimentation avant toute procédure d’entretien et de
réparation.
Caution Ensure that maintenance is performed only by qualified
personnel. Verify that all equipment is in a safe state after maintenance,
prior to returning the product to operation.
Attention Assurez-vous que l’entretien
est effectué uniquement par du personnel qualifié. Vérifiez que tout
l’équipement est dans un état sécurisé après l’entretien, avant de remettre
le produit en service.
Notice Ensure that your
facility can supply lighting of 300 lux or higher to safely service the RMX-10101/10102.
| Repair Kit Section | Replacement Shipping Kit | |
|---|---|---|
| Part Number | Description | |
| System Intake Filters | 789537-01 | RMX-10101 System Intake Filter |
| 789538-01 | RMX-10102 System Intake Filter | |
| Rack Control Unit (RCU) | 789473-01 | RCU-10110 Module Assembly |
| Fan Panel Assembly | 789465-01 | FAN-10130 Interface Gray Fan Panel Assembly |
| 789466-01 | FAN-10130 Environmental Gray Fan Panel Assembly | |
| Temperature Sensor | 789469-01 | TEMP-10120 Primary Temperature Sensor |
| 789470-01 | TEMP-10121 Daisy Chain Temperature Sensor | |
| 24 V Power Supply | 788924-01 | 120 W, 24 V Power Supply for RCU |
| 788925-01 | 240 W, 24 V Power Supply for Fans | |
| 788926-01 | 480 W, 24 V Power Supply for Fans | |
| RMX-10140 Power Entry Panel (PEP) | 789480-01 | RMX-10140-16S2 Module Assembly |
| 789486-01 | RMX-10140-24S2 Module Assembly | |
| 789481-01 | RMX-10140-16D2 Module Assembly | |
| 789482-01 | RMX-10140-16Y2 Module Assembly | |
| 789483-01 | RMX-10140-32D2 Module Assembly | |
| 789484-01 | RMX-10140-50D2P Module Assembly | |
| 789485-01 | RMX-10140-50Y2P Module Assembly | |
| 789460-01 | 6.3 A, 3AB Fuse | |
| 789463-01 | 20.0 A, 5 mm × 20 mm Fuse | |
| 789090-01 | 2.0 A, NANO Fuse | |
| 789464-01 | 30.0 A, 6.3 mm × 32 mm Fuse | |
| 789459-01 | 20.0 A, 6.3 mm × 32 mm Fuse | |
| RMX-10151 Single-Phase Power Distribution Unit (PDU) | 789471-01 | RMX-10151 Module Assembly |
| 789460-01 | 6.3 A, 3AB Fuse | |
| 789461-01 | 12.0 A, 5 mm × 20 mm Fuse | |
| 789089-01 | 12.5 A, 5 mm × 20 mm Fuse | |
| 789472-01 | RMX-10151 Rack Mount Kit | |
| RMX-10153 3-Phase PDU | 789496-01 | 3-Pole 3-Phase Filter |
| 789490-01 | 20 A 3-Pole Branch Circuit Breaker | |
| 789491-01 | 40 A 3-Pole Branch Circuit Breaker | |
| 789492-01 | 63 A 3-Pole Branch Circuit Breaker | |
| 789094-01 | 440 V 3-Pole (3NO) Contactor, 24 V to 60 V DC Controlled | |
| AUX DC PDU | 789467-01 | AUX DC 1200 PDU, 24 V |
| 789475-01 | AUX DC 600 PDU, Output CBBD | |
| 789476-01 | AUX DC 600 PDU, Output BBBB | |
| 789477-01 | AUX DC 600 PDU, Output BBDD | |
| 789478-01 | AUX DC 600 PDU, Output DBCC | |
| 789479-01 | AUX DC 600 PDU, Output DDDD | |
| I/O Panel Features | 789091-01 | EMO Button |
| 789096-01 | Main Power Button, Status LED, and Banana Jack | |
| 789097-01 | USB, Ethernet, and DisplayPort Cables | |
| 789092-01 | Dual C13 AC Power Cable | |
| 789093-01 | Third Party Equipment EMO Extension Cable | |
| 789098-01 | Rack-In EMO Extension Cable | |
| 789099-01 | Rack-Out EMO Extension Cable | |
| 789100-01 | GPIB Cable Assembly | |
| 789101-01 | Serial Cable Assembly | |
| 789102-01 | SMA Cable Assembly | |
| Tower Light | 789502-01 | Tower Light Kit |
| Casters | 789507-01 | ESD Casters |
| 789508-01 | Standard Casters | |
| Seismic Feet | 789539-01 | Seismic Feet Kit |
Be sure to review the RMX-10101/10102 safety requirements in the Safety, Environmental, and Regulatory Information document for your rack model before performing any repair procedures.
Related Information
- Compatible Lockout-Tagout Devices
Use a lockout-tagout device to ensure that the main circuit breaker of the RMX-10140 power entry panel (PEP) is properly shut off and cannot be switched on before maintenance or repair work is completed.