Home Support Documentation Supplemental

Archived: NI System Driver Set June 2011

Updated Oct 26, 2022

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

The NI System Driver Set June 2011 provides the latest version of NI drivers as of the release on June 3, 2011. NI LabVIEW 2010 Service Pack 1 is the latest version of the graphical development software supported by this driver set. This set adds support for the following hardware: cRIO-6075/76 Integrated Real-Time Controller, PXI-8531 CANopen Interface, AIT ARINC 429 Modules, AIT MIL-STD-15503 Interface Modules, PXIe-PCIe8388/89 High-Bandwidth PXI Remote Controllers, PXIe-8100 RT Real-Time Controller, PXI-2571 Switch Module and Phase Matrix 26.5 GHz Downconverter.

Back to top

Contents

The following drivers are included in the June 2011 set:

Data Acquisition

  • NI-DAQ 9.3
  • Traditional NI-DAQ 7.4.4 (Legacy)
  • NI-435x 2.5.2

Instrument Control

  • NI-488.2 2.8.1
  • NI-VISA 5.0.3
  • NI-Serial 3.7.0
  • IVI Compliance Package 4.3.0
  • PXI Platform Services 2.6.21
  • NI System Monitor 1.1.1
  • NI-VXI 3.8

Modular Instruments

  • NI-Switch 4.31
  • NI-DMM 3.0.4
  • NI-Scope 3.8
  • NI-RFSA 2.4
  • NI-PXI-5660 Support
  • NI-FGEN 2.8
  • NI-DCPower 1.6.01
  • NI-RFSG 1.7
  • NI-HSDIO 1.7.4
  • NI-5690 1.1
  • NI-5640R 1.5
  • NI-OSI 1.0.0
  • NI-VNA 1.0

Timing and Synchronization

  • NI-Sync 3.2.2
  • NI-TimeSync 1.1.0
  • NI-1588 Configuration 1.0.1

Reconfigurable IO

  • NI-RIO 3.6.12
  • NI-CompactRIO 3.6.12
  • NI-FlexRIO 1.6.12
    • FlexRIO Adapter Module Support 2.1.22 

Motion and Vision

  • NI-Motion 8.2
  • NI-IMAQ 4.5
  • NI-IMAQdx 3.7
  • NI-IMAQ I/O 2.4.0

Distributed I/O

  • NI-FieldPoint 6.0.8

Real-Time and Embedded

  • NI-488.2 2.8.1
  • NI-Serial 3.7.12
  • NI-Watchdog 5.0.0

Communication Buses and Protocols

  • NI-XNET 1.31
  • NI-CAN 2.7.2
  • NI-DNET 1.6.5
  • NI-IndCom for CANOpen 1.03
  • NI-Industrial Communication for DeviceNet 2.0.1

NI LabVIEW SignalExpress 2010
NI-Spy 2.7.2
NI Measurement & Automation Explorer 4.8
NI System Configuration 1.2
NI Network Browser 1.1.0
NI-PAL 2.6.5

 

1NOTE: Major update from NI System Driver Set April 2011.

2NOTE: Minor update from NI System Driver Set April 2011.

3NOTE: New driver added from NI System Driver Set April 2011.

Back to top

Related Links

Back to top

Was this information helpful?

Yes

No