NI does not actively maintain this document.
This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.
Archived: NI System Driver Set April 2011
The NI System Driver Set April 2011 provides the latest version of NI drivers as of the release on April 8, 2011. NI LabVIEW 2011 Service Pack 1 is the latest version of the graphical development software supported by this driver set. This set adds support for the following hardware: PXIe-5185/86 High-Speed Digitizers and PXI-2571 Switch Module.
Contents
The following drivers are included in the August 2010 set:
Data Acquisition
- NI-DAQ 9.31
- Traditional NI-DAQ 7.4.4 (Legacy)
- NI-435x 2.5.2
Instrument Control
- NI-488.2 2.8.1
- NI-VISA 5.0.3
- NI-Serial 3.7.0
- IVI Compliance Package 4.3.0
- PXI Platform Services 2.5.6
- NI System Monitor 1.1.1
- NI-VXI 3.82
Modular Instruments
- NI-Switch 4.1.0
- NI-DMM 3.0.4
- NI-Scope 3.81
- NI-RFSA 2.4
- NI-PXI-5660 Support
- NI-FGEN 2.8
- NI-DCPower 1.5.0
- NI-RFSG 1.7
- NI-HSDIO 1.7.4
- NI-5690 1.1
- NI-5640R 1.5
- NI-OSI 1.0.0
- NI-VNA 1.0
Timing and Synchronization
- NI-Sync 3.2.2
- NI-TimeSync 1.1.0
- NI-1588 Configuration 1.0.1
Reconfigurable IO
- NI-RIO 3.6
- NI-CompactRIO 3.6
- NI-FlexRIO 1.6
- FlexRIO Adapter Module Support 2.1.11
Motion and Vision
- NI-Motion 8.2
- NI-IMAQ 4.5
- NI-IMAQdx 3.7
- NI-IMAQ I/O 2.4.0
Distributed I/O
- NI-FieldPoint 6.0.8
Real-Time and Embedded
- NI-488.2 2.8.1
- NI-Serial 3.7.0
- NI-Watchdog 5.0.0
Communication Buses and Protocols
- NI-XNET 1.1.1
- NI-CAN 2.7.2
- NI-DNET 1.6.5
- NI-Industrial Communication for DeviceNet 2.0.1
NI LabVIEW SignalExpress 2010
NI-Spy 2.7.2
NI Measurement & Automation Explorer 4.81
NI System Configuration 1.21
NI Network Browser 1.1.0
NI-PAL 2.6.52
1NOTE: Major update from NI System Driver Set February 2011.
2NOTE: Minor update from NI System Driver Set February 2011.
Customize Your System