From Saturday, Nov 23rd 7:00 PM CST - Sunday, Nov 24th 7:45 AM CST, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
FlexRIO Driver and LabVIEW Version Compatibility
Overview
Starting with LabVIEW 2015, the NI-RIO device driver split into three separate installers: CompactRIO Device Drivers (supports CompactRIO and Single-Board RIO), R Series Multifunction (supports R Series cards), and FlexRIO (supports FlexRIO boards).
This page shows supported versions of the FlexRIO Driver with LabVIEW development systems. Reference this information to ensure that you install the correct driver version when upgrading or updating your system or software. Using incompatible versions may result in errors, or missing palettes or functions.
Note: For information about NI driver and development software compatibility after 2022 Q4, please refer to NI Driver and Development Software Compatibility.
FlexRIO and LabVIEW Compatibility
In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.
FlexRIO | LabVIEW Version | |||||
|---|---|---|---|---|---|---|
| 2022 Q3 | 2021 | 2020 | 2019 | 2018 | 2017 | |
| 2022 Q4 | ||||||
| 2022 Q3 | ||||||
| 21.8 | ||||||
| 21.5 | ||||||
| 21.3 | ||||||
| 21.0 | ||||||
| 20.7 | ||||||
| 20.6 | ||||||
| 20.1 | ||||||
| 20.0 | ||||||
Compatible with Base Only
Compatible with SP1 and Base
