Archived: NI-RIO and LabVIEW Version Compatibility

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Overview

This page shows supported versions of NI-RIO with LabVIEW development systems. Reference this information to ensure that you install the correct toolkit version when upgrading or updating your system or software. Using incompatible versions may result in errors, or missing palettes or functions.

 

Starting with LabVIEW 2015, NI-RIO has been split into three separate installers. CompactRIO Device Drivers (supports CompactRIO and Single-Board RIO), R Series Multifunction (supports R Series cards), and FlexRIO (supports FlexRIO boards). 

 

The table below shows compatibility for NI-RIO until version 14.5. For continued compatibility information for the separate installers refer to the following:

 

NI-RIO Driver and LabVIEW Compatibilty

In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.

Use this table to compare versions of NI-RIO Driver to compatible versions of LabVIEW
NI‑RIOLabVIEW Versions
2014 SP120142013 SP120132012 SP120122011 SP120112010 SP12010
14.5.0      
14.0.1      
14      
13.1.1      
13.1      
13.0.1      
13      
12.1       
12       
4.1        

Compatible

Was this information helpful?

Yes

No