From Saturday, Nov 23rd 7:00 PM CST - Sunday, Nov 24th 7:45 AM CST, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Saturday, Nov 23rd 7:00 PM CST - Sunday, Nov 24th 7:45 AM CST, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
This page shows supported versions of the Traditional NI-DAQ (Legacy), formerly known as just NI-DAQ, hardware driver with LabVIEW development systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabVIEW palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).
Note: The last fully supported LabVIEW version for NI-DAQ is 8.6. For subsequent LabVIEW versions, NI does not support NI-DAQ compatibility. NI recommends to Transition from Traditional NI-DAQ (Legacy) to NI-DAQmx in LabVIEW. Before installing NI-DAQmx, please refer to NI-DAQmx and LabVIEW Compatibility.
| Traditional NI-DAQ Version | LabVIEW Version | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8.6 | 8.5 | 8.2 | 8.0 | 7.1 | 7.0 | 6.1 | 6.0 | 5.1.2 | 5.1 | 5.0.1 | |
| 7.5 | |||||||||||
| 7.4.4 | |||||||||||
| 7.4.1 | |||||||||||
| 7.4 | |||||||||||
| 7.3 | |||||||||||
| 7.2 | |||||||||||
| 7.1 | |||||||||||
| 7.0.1 | |||||||||||
| 7.0 | |||||||||||
| 6.9.3 | |||||||||||
Note: In order to use a 64-bit operating system, you will need to update to the NI-DAQmx drivers. Traditional NI-DAQ (Legacy) is not compatible with any 64-bit operating systems.
Compatible
Compatible with LabVIEW Only
Compatible with LabVIEW Real-Time Only