NI-DAQmx and LabVIEW Compatibility

Overview

This page shows supported versions of the NI-DAQmx hardware driver with LabVIEW or LabVIEW Real-Time Development Systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabVIEW palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).

 

Note: For information about NI driver and development software compatibility after 2023 Q3, please refer to NI Driver and Development Software Compatibility.

Contents

NI-DAQmx Compatibility with LabVIEW Service Packs

LabVIEW service packs do not affect compatibility with NI-DAQmx. For example, DAQmx 15.0 is compatible with LabVIEW 2015 and also LabVIEW 2015 SP1. This does not necessarily apply to other NI drivers.

NI-DAQmx and LabVIEW Compatibility Table

The table below refers to NI-DAQmx and LabVIEW (Community, Professional and Run-Time) versions. 

Use this table to compare versions of NI-DAQmx to compatible versions of LabVIEW

NI-DAQmx VersionLabVIEW/LabVIEW Real-Time Version
2023 Q32023 Q12022 Q3202120202019201820172016
2023 Q3    
2023 Q2     
2023 Q1     
2022 Q4     
2022 Q3     
21.8     
21.3     
21.0     
20.7     
20.0     
19.6     
19.5     
19.1     

Compatible

For future DAQmx LabVIEW compatibility, see the NI Driver and Development Software Compatibility page.

Older NI-DAQmx and LabVIEW Versions

For compatibility between older versions of DAQmx or LabVIEW, see the DAQmx LabVIEW Compatibility Table attachment in the Downloads section of this document.

Was this information helpful?

Yes

No