Results
NIDCPOWER_ATTR_LCR_STIMULUS_FUNCTION
Specifies the type of test signal to apply to the DUT for LCR measurements.
- 1 minute read
- Last Updated2023-04-15
- Manual: NI-DCPower C Function Reference Help
NIDCPOWER_ATTR_LCR_VOLTAGE_AMPLITUDE
Specifies the amplitude, in VÂ RMS, of the AC voltage test signal applied to the DUT for LCR measurements.
- 1 minute read
- Last Updated2023-04-15
- Manual: NI-DCPower C Function Reference Help
niDCPower_GetAttributeViReal64
ViStatus niDCPower_GetAttributeViReal64(ViSession vi, ViConstString channelName, ViAttr attribute, ViReal64 *value);
- 2 minute(s) read
- Last Updated2023-04-15
- Manual: NI-DCPower C Function Reference Help
niDCPower_GetAttributeViSession
ViStatus niDCPower_GetAttributeViSession(ViSession vi, ViConstString channelName, ViAttr attribute, ViSession *value);
- 2 minute(s) read
- Last Updated2023-04-15
- Manual: NI-DCPower C Function Reference Help
NIDCPOWER_ATTR_MEASURE_AUTORANGE_MINIMUM_APERTURE_TIME
Specifies the measurement autorange aperture time used for the measurement autorange algorithm. The aperture time is specified in the units set by the NIDCPOWER_ATTR_MEASURE_AUTORANGE_MINIMUM_APERTURE_TIME_UNITS attribute. This value will typically be smaller than the aperture time used for measurements.
- 1 minute read
- Last Updated2023-04-15
- Manual: NI-DCPower C Function Reference Help
NIDCPOWER_ATTR_PULSE_BIAS_VOLTAGE_LIMIT_LOW
Specifies the minimum voltage, in volts, that the output can produce when generating the desired pulse current on the specified channel(s) during the off phase of a pulse.
- 2 minute(s) read
- Last Updated2023-04-15
- Manual: NI-DCPower C Function Reference Help
niDCPower_GetCalUserDefinedInfo
ViStatus niDCPower_GetCalUserDefinedInfo(ViSession vi, ViString info);
- 1 minute read
- Last Updated2023-04-15
- Manual: NI-DCPower C Function Reference Help
niDCPower_GetCalUserDefinedInfoMaxSize
ViStatus niDCPower_GetCalUserDefinedInfoMaxSize(ViSession vi, ViInt32*infoSize);
- 1 minute read
- Last Updated2023-04-15
- Manual: NI-DCPower C Function Reference Help
niDCPower_GetChannelNameFromString
ViStatus niDCPower_GetChannelNameFromString(ViSession vi, ViInt32 index, ViInt32 bufferSize, ViChar channelName[]);
- 2 minute(s) read
- Last Updated2023-04-15
- Manual: NI-DCPower C Function Reference Help
niDCPower_GetChannelName
ViStatus niDCPower_GetChannelName(ViSession vi, ViInt32 index, ViInt32 bufferSize, ViChar channelName[]);
- 1 minute read
- Last Updated2023-04-15
- Manual: NI-DCPower C Function Reference Help