Results
Connection Guidelines
Always connect analog signals using shielded, twisted pair cables. Unshielded cables may lead to values outside the specified tolerance limits in environments subject to heavy noise. Connect the cable shield to functional earth ground immediately after the cables enter the
- 1 minute read
- Last Updated2023-02-20
- Manual: REM-11100 Getting Started
Installing the REM-11100
Figure 2. Structure of the REM-11100 Bus connector REM-11100 Module function label Supply voltage connector Spring-terminal block LED indicators Table 1. Module Function Labels Label Color Module Function Blue Digital input Red Digital output Green Analog input, thermocouple Yellow Analog
- 1 minute read
- Last Updated2023-02-20
- Manual: REM-11100 Getting Started
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable protection against harmful interference when the product is operated in the intended operational
- 1 minute read
- Last Updated2023-02-20
- Manual: REM-11100 Getting Started
Overview
This document explains how to connect to the REM-11100 . Note The guidelines in this document are specific to the REM-11100 . The other components in the system might not meet the same safety ratings. Refer to the documentation for
- 1 minute read
- Last Updated2023-02-20
- Manual: REM-11100 Getting Started
Installing Bus Connectors
What to Use Bus connector DIN rail What to Do Complete the following steps to install bus connectors on the DIN rail. Insert the bus connector for the REM-11100 into the DIN rail. Caution Verify that you are using the
- 1 minute read
- Last Updated2023-02-20
- Manual: REM-11100 Getting Started
Installing the Module
What to Use REM-11100 Mounted bus connector What to Do Complete the following steps to install the REM-11100 on the DIN rail. Align the REM-11100 over the appropriate bus connector. Note Verify that the bus connector socket aligns with the
- 1 minute read
- Last Updated2023-02-20
- Manual: REM-11100 Getting Started
Installing Spring-Terminal Blocks
What to Use REM-11100 Spring-terminal block What to Do Align the spring-terminal block over the REM-11100 and press until it clicks into place. Parent topic: Installing the REM-11100
- 1 minute read
- Last Updated2023-02-20
- Manual: REM-11100 Getting Started
Isolation Withstand Voltages
Test section Test voltage 5 V communications power (logic), 24 V supply (I/O) 500 VAC , 50 Hz , 1 min. 5 V supply (logic) / analog inputs 500 VAC , 50 Hz , 1 min. 5 V supply (logic)
- 1 minute read
- Last Updated2023-02-20
- Manual: REM-11100 Getting Started
REM-11100 Pinout
Table 2. REM-11100 Signal Descriptions Signal Color Description a1, a2 Red 24 VDC (U A ) Supply for analog modules (internally jumpered) b1, b2 Blue GND Reference potential of the supply voltage (internally jumpered) 00 to 03 Orange AI0+ to
- 2 minute(s) read
- Last Updated2023-02-20
- Manual: REM-11100 Getting Started
Preparing the Environment
Ensure that the environment in which you are using the REM-11100 meets the following specifications. Operating temperature -25 °C to 60 °C Operating humidity 5% RH to 95% RH, noncondensing Pollution Degree 2 Maximum altitude 3,000 m Indoor use only.
- 1 minute read
- Last Updated2023-02-20
- Manual: REM-11100 Getting Started