Back Panel Features
- Updated2023-09-07
- 2 minute(s) read
Back Panel Features
|
|
| 1 Antenna | 5 Chassis Ground Screw |
| 2 Reset Button | 6 Power Connector |
| 3 USB Port | 7 Ethernet Port and LEDs |
| 4 Security Cable Slot | |
Antenna
Refer to the NI VirtualBench Specifications for information about the antenna on VirtualBench.
Reset Button
Refer to the Reset Button topic for information about using this button.
USB Port
Refer to the NI VirtualBench Specifications for information about the USB port on VirtualBench.
(Optional) You can provide strain relief for the USB cable by using the jackscrew on a locking USB cable (NI part number 198506-01) to securely attach the cable to the chassis.
Ethernet Port and LEDs
Refer to the NI VirtualBench Specifications for information about the Ethernet port on some models of VirtualBench.
Refer to the Ethernet LEDs topic for information about the 10/100/1000 and LINK/ACT LEDs on the Ethernet connector.
Security Cable Slot
The security cable slot allows you to attach an optional laptop lock to your VirtualBench. The security cable slot might not be compatible with all laptop lock cables.
 |
Note The security cable is designed to act as a deterrent, but might not prevent the device from being mishandled or stolen. For more information, refer to the documentation that accompanied the security cable. |
Chassis Ground Screw
The chassis ground screw provides an additional access point to chassis ground for measurement accuracy so that all instruments are at the same potential.
Power Connector
Refer to the Power Requirements section in the NI VirtualBench Specifications for information about the power connector on VirtualBench.