MSO Get Compensator Attenuation Calibration Adjustment Points (VI)
- Updated2023-09-07
- 4 minute(s) read
MSO Get Compensator Attenuation Calibration Adjustment Points (VI)
Owning Palette: Mixed Signal Oscilloscope CalibrationInstalled With: NI-VirtualBench application development support
Returns the configuration values necessary for MSO Adjust Compensator Attenuation. Each element of the Range, Amplitude, and Frequency arrays correspond to each other.
Instrument Handle In specifies the session created by the Initialize VI. |
|||||||
error in describes error conditions that occur before this VI or function runs. The default is no error. If an error occurred before this VI or function runs, the VI or function passes the error in value to error out. If an error occurs while this VI or function runs, the VI or function runs normally and sets its own error status in error out. Use the Simple Error Handler or General Error Handler VIs to display the description of the error code. Use error in and error out to check errors and to specify execution order by wiring error out from one node to error in of the next node.
|
|||||||
Instrument Handle Out is a reference to the instrument. |
|||||||
Range indicates an array of ranges. |
|||||||
Amplitude indicates an array of peak-to-peak amplitudes. |
|||||||
Frequency indicates an array of frequencies. |
|||||||
error out contains error information. If error in indicates that an error occurred before this VI or function ran, error out contains the same error information. Otherwise, error out describes the error status that this VI or function produces. Right-click the error out indicator on the front panel and select Explain Error from the shortcut menu for more information about the error.
|