Single Ethernet Interface—One Device

You can configure multiple devices using a single host Ethernet interface when the devices are connected to each other using a MIMO cable.

  1. Assign each device a separate IP address in the subnet of the host Ethernet interface, as shown in the following table.
    Table 3. Single Host Ethernet Interface—MIMO Configuration
    Device Host IP Address Host Subnet Mask Device IP Address
    USRP Device 0 192.168.10.1 255.255.255.0 192.168.10.2
    USRP Device 1 192.168.10.1 255.255.255.0 192.168.10.3
  2. Connect Device 0 to the Ethernet interface and connect Device 1 to Device 0 using a MIMO cable.