Wiring the USB-6451
- Updated2025-02-07
- 1 minute(s) read
Wiring the USB-6451
What
to Use
- 0.14 mm2 to 1.5 mm2 (26 AWG to 16 AWG) copper conductor wire with 10 mm (0.394 in.) of insulation stripped from the end
What
to Do
Refer to the following table for how to insert a wire into a terminal depending
on what type of wire you are using or if you are using a ferrule.
| Option | Description |
|---|---|
| When using a solid wire or stranded wire with a ferrule | Push the wire into the terminal when using a solid wire or stranded wire with a ferrule |
| When using a stranded wire without a ferrule | Press the push button and then push the wire into the terminal |
Note You must use 2-wire
ferrules to create a secure connection when connecting more than one wire to
a single terminal.