SHDB9M-DB9F-SHUNT Specifications

Definitions

Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty.

Characteristics describe values that are relevant to the use of the model under stated operating conditions but are not covered by the model warranty.

  • Typical specifications describe the performance met by a majority of models.
  • Nominal specifications describe an attribute that is based on design, conformance testing, or supplemental testing.

Specifications are Typical unless otherwise noted.

Conditions

Specifications are valid for the range 0 °C to 55 °C unless otherwise noted.

Safety Voltage and Power

Maximum working voltage (any pin to any pin, pin to shield)

±10 V DC

Maximum power dissipation

2 W

Notice Do not connect this shunt to signals that exceed the maximum working voltage. Connecting to voltages that exceed specifications could damage the shunt, the connected cable, and the connected transducer.

Physical Characteristics

Length

72.0 mm (2.83 in.)

Weight

90.0 g (3.17 oz)

I/O connector

Male

9-pin DSUB

Female

9-pin DSUB

Table 1. Resistance and Temperature Coefficient of Resistance (TCR)
Part Number Resistance Resistance Tolerance Typical TCR and Maximum Spread[1]
786897-0R5 0.5 Ω ±0.05% ±0.2 ± 2.8 ppm/°C
786897-01 1 Ω
786897-02 2 Ω
786897-05 5 Ω
786897-10 10 Ω ±0.02% ±0.2 ± 1.8 ppm/°C

Environmental Characteristics

Temperature

Operating

0 °C to 55 °C

Storage

-40 °C to 71 °C

Humidity

Operating

10% RH to 90% RH, noncondensing

Storage

5% RH to 95% RH, noncondensing

Pollution Degree

2

Maximum altitude

2,000 m

1 TCR values typical at -55 °C to 125 °C, +25 °C ref