sbRIO-96xx Startup Options
- Updated2024-02-12
- 1 minute(s) read
sbRIO-96xx Startup Options
You can configure the following sbRIO-96xx startup options.
| Startup Option | Description |
|---|---|
| Force Safe Mode | Rebooting the sbRIO-96xx with this setting on starts the sbRIO-96xx without launching LabVIEW Real-Time or any startup applications. In safe mode, the sbRIO-96xx launches only the services necessary for updating configuration and installing software. |
| Enable Console Out | Rebooting the sbRIO-96xx with this setting on redirects the console output to the RS-232 serial port. You can use a serial-port terminal program to read the IP address and firmware version of the sbRIO-96xx. Use a null-modem cable to connect the RS-232 serial port to a computer. Make sure that the serial-port terminal program is configured to the following settings:
|
| Disable RT Startup App | Rebooting the sbRIO-96xx with this setting on prevents any LabVIEW startup applications from running. |
| Disable FPGA Startup App | Rebooting the sbRIO-96xx with this setting on prevents autoloading of any FPGA application. |
| Enable Secure Shell (SSH) Logins | Rebooting the sbRIO-96xx with this setting on
starts sshd on the sbRIO-96xx. Starting
sshd enables logins over SSH, an encrypted communication protocol.
Note Visit ni.com/r/openssh for more information about SSH.
|
| LabVIEW Project Access | Rebooting the sbRIO-96xx with this setting on enables you to add the target to a LabVIEW project. |