RFmxLTE_CfgNumberOfPDSCHChannels
- Updated2024-10-14
- 1 minute(s) read
RFmxLTE_CfgNumberOfPDSCHChannels
int32 __stdcall RFmxLTE_CfgNumberOfPDSCHChannels (niRFmxInstrHandle instrumentHandle, char selectorString[], int32 numberOfPDSCHChannels);
Purpose
Configures the number of different physical downlink shared channel (PDSCH) allocations in a subframe.
Use "subframe<l>" or "carrier<k>" or "subblock<n>" or "subblock<n>/carrier<k>/subframe<l>" as the selector string to configure this function.
Parameters
| Input | ||
| Name | Type | Description |
| instrumentHandle | niRFmxInstrHandle | Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize function. |
| selectorString | char[] | Specifies a selector string comprising of the signal name, subblock number, carrier number, and subframe number. If you do not specify the signal name, the default signal instance is used. Example: "subblock0/carrier0/subframe0" "signal::sig1/subblock0/carrier0/subframe0" You can use the RFmxLTE_BuildSubframeString function to build the selector string. |
| numberOfPDSCHChannels | int32 | Specifies the number of PDSCH allocations in a subframe. |
Return Value
| Name | Type | Description | ||||||||
| status | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError function. The general meaning of the status code is as follows:
|
||||||||