RFmx LTE CVI

Content Type
Programming Language
Current manual

RFmxLTE_CfgNPUSCHFormat

RFmxLTE_CfgNPUSCHFormat

int32 __stdcall RFmxLTE_CfgNPUSCHFormat (niRFmxInstrHandle instrumentHandle, char selectorString[], int32 format);

Purpose

Configures the format of the narrowband physical uplink shared channel (NPUSCH).
Use "carrier<k>" or "subblock<n>/carrier<k>" as the selector string to configure this function.

Parameters

Input
Name Type Description
instrumentHandle niRFmxInstrHandle Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize function.
selectorString char[] Specifies a selector string comprising of the signal name, subblock number and carrier number. If you do not specify the signal name, the default signal instance is used.
Example:
"subblock0/carrier0"
"signal::sig1/subblock0/carrier0"
You can use the RFmxLTE_BuildCarrierString function to build the selector string.
format int32 Specifies the NPUSCH format. A value of 1 indicates that NPUSCH carries user data (UL-SCH) and a value of 2 indicates, NPUSCH carries uplink control information.

Return Value

Name Type Description
status int32 Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError function.

The general meaning of the status code is as follows:

Value Meaning
0 Success
Positive Values Warnings
Negative Values Errors
Was this information helpful?