RFmxLTE_CfgDownlinkTestModelArray
- Updated2024-10-14
- 2 minute(s) read
RFmxLTE_CfgDownlinkTestModelArray
int32 __stdcall RFmxLTE_CfgDownlinkTestModelArray (niRFmxInstrHandle instrumentHandle, char selectorString[], int32 downlinkTestModel[], int32 numberOfElements);
Purpose
Configures the EUTRA test model type for each component carrier within the subblock.
Parameters
| Input | ||||||||||||||||||||||
| Name | Type | Description | ||||||||||||||||||||
| instrumentHandle | niRFmxInstrHandle | Specifies the instrument session. The RFmx obtains this parameter from the RFmxLTE_Initialize function. | ||||||||||||||||||||
| selectorString | char[] | Specifies a selector string comprising of the signal name and the subblock number. If you do not specify the signal name, the default signal instance is used. Example: "subblock0" "signal::sig1/subblock0" You can use the RFmxLTE_BuildSubblockString function to build the selector string. |
||||||||||||||||||||
| downlinkTestModel | int32[] | Specifies the array of EUTRA test model types when you set the
RFMXLTE_ATTR_DOWNLINK_CHANNEL_CONFIGURATION_MODE attribute to RFMXLTE_VAL_DOWNLINK_CHANNEL_CONFIGURATION_MODE_TEST_MODEL. Refer to section 6.1.1 of the 3GPP 36.141 specification for more information regarding test model configurations.
|
||||||||||||||||||||
| numberOfElements | int32 | Specifies the number of elements in each array. | ||||||||||||||||||||
Return Value
| Name | Type | Description | ||||||||
| status | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the RFmxLTE_GetError function. The general meaning of the status code is as follows:
|
||||||||