PXIe-8520 Specifications

PXIe-8520 Specifications

These specifications apply to the PXIe-8520 and all interface devices that may be installed within the PXIe-8520.

Revision History

Version Date changed Description
379025A-01 March 2025 Initial release.

Looking For Something Else?

For information not found in the specifications for your product, such as operating instructions, browse Related Information.

Definitions

Warranted Specifications describe the performance of a model under stated operating conditions and are covered by the model warranty.

Characteristics describe values that are relevant to the use of the model under stated operating conditions but are not covered by the model warranty.

  • Typical—describes the performance met by a majority of models.
  • Nominal—describes an attribute that is based on design, conformance testing, or supplemental testing.

    • Values are Typical unless otherwise noted.

    Conditions

    Specifications are typical at 0 °C to 55 °C unless otherwise noted.

    PXIe-8520 Pinout

    The I/O of the interface devices installed within the PXIe-8520 interface carrier determine the available I/O.

    IVN-8532 Pinout

    Use the pinout to connect to the H-MTD Z (f) ports on the IVN-8532 when it is installed within the PXIe-8520.

    Each IVN-8532 has two H-MTD Z (f) ports.

    Figure 1. IVN-8532 H-MTD Z (f) Connector Pinout


    Table 1. IVN-8532 Signal Descriptions
    Signal Name Description
    P Transceiver positive
    N Transceiver negative

    Physical Characteristics

    Table 2. PXIe-8520 Physical Characteristics
    Dimensions

    3U, one-slot, PXI Express/Compact PCI Express module

    2.0 cm × 13.0 cm × 21.6 cm (0.8 in. × 5.1 in. × 8.5 in.)
    Weight 452.6 g (1.00 lb)
    Table 3. IVN-8532 Physical Characteristics
    Dimensions 1.7 cm × 4.7 cm × 9.8 cm (0.7 in. × 1.8 in. × 3.9 in.)
    Weight 38.5 g (0.08 lb)

    For more information, such as dimensional drawings, visit ni.com/dimensions and search by module number.

    Network Interface

    PXIe-8520 with IVN-8532

    Port configuration 4 endpoints
    Protocols
    • IEEE 802.3 Raw Ethernet
    • TCP/IP
    • UDP/IP
    • IEEE 802.1AE (MACsec)
    Note For information about using endpoints, refer to the user manual.

    Bus Interface

    Form factor Gen 3 x8 PXI Express, specification revision 1.0 compliant
    Slot compatibility x1, x4, x8 and x16 PXI Express or PXI Express hybrid slots

    Power Requirements

    Table 4. PXIe-8520 Power Requirements
    Voltage rating +3.3 V DC, +12 V DC
    Current and power ratings
    • +3.3 V DC: 3 A
    • +12 V DC: 4 A
    Total power: 58 W
    Table 5. IVN-8532 Power Requirements (J1)
    Voltage rating +12 V DC, +4.35 V DC, +1.8 V DC
    Current and power ratings
    • +12 V DC: 50 mA
    • +4.35 V DC: 250 mA
    • +1.8 V DC: 150 mA

    Environmental Guidelines

    Notice Failure to follow the mounting instructions in the product documentation can cause temperature derating.
    Notice This product is intended for use in indoor applications only.

    Environmental Characteristics

    Table 6. Temperature
    Operating0 °C to 55 °C[1]1 Not all chassis with slot cooling capacity ≥58 W can achieve this ambient temperature range. Refer to PXI chassis specifications to determine the ambient temperature ranges your chassis can achieve.
    Storage-40 °C to 71 °C
    Table 7. Humidity
    Operating10% RH to 90 % RH, noncondensing
    Storage5% RH to 95 % RH, noncondensing
    Table 8. Pollution Degree
    Pollution degree2
    Table 9. Maximum Altitude
    Maximum altitude2,000 m
    Table 10. Shock and Vibration
    Operating vibration 5 Hz to 500 Hz, 0.3 g RMS
    Non-operating vibration 5 Hz to 500 Hz, 2.4 g RMS
    Operating shock30 g, half-sine, 11 ms pulse

    1 Not all chassis with slot cooling capacity ≥58 W can achieve this ambient temperature range. Refer to PXI chassis specifications to determine the ambient temperature ranges your chassis can achieve.