PXIe-5413 Power On and Device Reset

The PXIe-5413 has different settings when powering on and after powered on or a device reset.

The PXIe-5413 is in the following state from the time at which the computer begins to power on until the operating system has started and NI-FGEN is loaded.

CH <0..1> PFI <0..1> PXI_Trig <0..7>
  • Analog output is disabled.
  • 0 V amplitude
  • 50 Ω output impedance to ground
  • Tristated
  • Tristated and floating

When the operating system has started and NI-FGEN is loaded or after performing a device reset, the PXIe-5413 is in the following state.

CH <0..1> PFI <0..1> PXI_Trig <0..7> Clocks
  • Analog output is enabled.
  • 0 V amplitude
  • 0 dB attenuation
  • Low-gain amplifier path is enabled.
  • Tristated
  • Tristated and floating
  • Sample Clock Timebase is set to use the internal voltage-controlled crystal oscillator (VCXO).