Configuring the PXIe-4464 in MAX
- Updated2024-03-25
- 1 minute(s) read
Configuring the PXIe-4464 in MAX
Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which devices reside in the system and how they are configured. MAX is automatically installed with NI-DAQmx.
- Launch MAX.
- In the Configuration pane, expand Devices and Interfaces to see a
list of installed devices. Installed devices appear under the name of their
associated chassis.Note If you are using the PXIe-4464 with the LabVIEW Real-Time Module, expand Remote Systems. Find your target IP address or name, expand it, and then expand Devices and Interfaces.
- Expand your Chassis tree item. MAX lists all devices installed in the
chassis. Your default device names may vary.Note If you do not see your hardware listed, press <F5> to refresh the list of installed devices. If the device still is not listed, power off the system, ensure the device is correctly installed, and restart.
- Record the device identifier MAX uses to identify the hardware. Use this identifier when programming the PXIe-4464.