Individual Sources/Receiver:Receiver Frequency Multiplier Property
- Updated2023-02-21
- 1 minute(s) read
Individual Sources/Receiver:Receiver Frequency Multiplier Property
Short Name: Receiver Frequency Multiplier
Property of niVNA
Specifies the multiplier value in the receiver frequency offset equation.
The frequency offset equation is (M * f) + b, where M is the multiplier, f is the frequency list defined by the start and stop frequency properties, and b is the offset defined by the Receiver Frequency Offset property.
Note If you specify values for M and b that, after calculation, result in a value that is out of the frequency range, NI-VNA returns an error. |
Default Value: 1
Supported Devices: NI 5632
Remarks
The following table lists the characteristics of this property.
Datatype | |
Permissions | Read/Write |
High-level VIs | niVNA Configure Frequency Offset Equation |
Channel-based | Yes |
Port-based | No |
Device-based | No |
Standard-based | No |
Band-based | No |
Resettable | No |