Sweep:Format Phase Offset Property
- Updated2023-02-21
- 1 minute(s) read
Sweep:Format Phase Offset Property
Short Name: Format Phase Offset
Property of niVNA
Specifies the phase offset that is applied to the formatted data. This property only shifts the phase of the returned data by the specified amount. The reference plane configuration is not affected.
Units: degrees
Default Value: 0
Supported Devices: NI 5630/5632
Remarks
The following table lists the characteristics of this property.
Datatype | |
Permissions | Read/Write |
High-level VIs | N/A |
Channel-based | No |
Port-based | No |
Device-based | Yes |
Standard-based | No |
Band-based | No |
Resettable | No |