Onboard Signal Processing:Equalization:Equalization Filter Enabled Property

Short Name: Equalization Filter Enabled

Property of niScope

Enables the onboard signal processing equalization FIR block, which is connected directly to the input signal. The equalization filter is designed to compensate the input signal for artifacts introduced to the signal outside of the digitizer. Because this filter is a generic FIR filter, any coefficients are valid. Coefficient values should be between +1 and -1. The default value is FALSE.

Note  This property can be used only with high-speed digitizers that support onboard signal processing (OSP). NI-SCOPE returns an error if you use this property with a device that does not support OSP.

Remarks

The following table lists the characteristics of this property.

Datatype
Permissions	Read/Write
High-level VIs	N/A
Channel-based	Yes
Resettable	No