niFgen Set Sample Rate VI
- Updated2023-02-21
- 2 minute(s) read
niFgen Set Sample Rate VI
Installed With: NI-FGENConfigures the sample rate, which determines the rate at which the signal generator produces arbitrary waveforms. When you configure the signal generator to produce an arbitrary sequence, this is the sample rate for all arbitrary waveforms in the sequence. If the update clock (Sample clock) source is external, setting the sample rate informs NI-FGEN of the external rate.
 |
Note The signal generator must not be in the Generating state when you call this VI. |
|
Note You must set the Output Mode to Arbitrary Waveform or Arbitrary Sequence using the niFgen Configure Output Mode VI before calling this VI. |
 |
Instrument Handle identifies your instrument session. Instrument Handle is obtained from the niFgen Initialize VI, niFgen Initialize With Options VI, or the niFgen Initialize With Channels VI. |
 |
Sample Rate specifies the sample rate at which you want the signal generator to generate arbitrary waveforms. If you are using an external update clock (Sample clock), this is the frequency of the external update clock. Units: Samples per second (S/s) |
 |
error in describes error conditions that occur before this node runs. This input provides standard error in functionality. Default value: no error |
 |
Instrument Handle Out passes a reference to your instrument session to the next VI. |
 |
error out contains error information. This output provides standard error out functionality. |