niFgen Set Named Waveform Next Write Position VI
- Updated2023-02-21
- 3 minute(s) read
niFgen Set Named Waveform Next Write Position VI
Installed With: NI-FGENSets the position in the named waveform to which data is written at the next write. This VI allows you to write to arbitrary locations within the waveform. These settings apply only to the next write to the waveform specified by the Waveform Name parameter. Subsequent writes to that waveform begin where the last write ended, unless this VI is called again. The Waveform Name passed in must have been created by a call to the niFgen Allocate Waveform VI or the niFgen Clear Arbitrary Waveform VI.
 |
Instrument Handle identifies your instrument session. Instrument Handle is obtained from the niFgen Initialize VI, niFgen Initialize With Options VI, or the niFgen Initialize With Channels VI. |
|||||||||
 |
Channel Name specifies the channel that this VI uses. |
|||||||||
|
Waveform Name specifies the name of the waveform. |
|||||||||
 |
Relative To specifies the reference position in the waveform. This position and Offset together determine where to start loading data into the waveform.
|
|||||||||
|
Offset specifies the offset from the Relative To parameter at which to start loading the data into the waveform. |
|||||||||
 |
error in describes error conditions that occur before this node runs. This input provides standard error in functionality. Default value: no error |
|||||||||
 |
Instrument Handle Out passes a reference to your instrument session to the next VI. |
|||||||||
 |
Waveform Name Out passes the name of the named waveform. |
|||||||||
 |
error out contains error information. This output provides standard error out functionality. |