Skip to main content Skip to search

Table of Contents

NI-DAQmx Properties
- DAQmx Buffer
- DAQmx Calibration Info
- DAQmx Channel
- DAQmx Device
- DAQmx Export Signal
- DAQmx Persisted Channel
- DAQmx Persisted Scale
- DAQmx Persisted Task
- DAQmx Physical Channel
- DAQmx Read
- DAQmx Real-Time
- DAQmx Scale
- DAQmx Switch Channel
- DAQmx Switch Device
- DAQmx Switch Scan
- DAQmx System
- DAQmx Task
- DAQmx Timing
  - Sample Quantity
  - Sample Timing Type
  - Sample Clock
    - Rate
    - Maximum Rate
    - Source
    - Active Edge
    - Overrun Behavior
    - Underflow Behavior
    - Timebase Divisor
    - Terminal
    - Timebase
    - Digital Filter
    - Digital Synchronization
    - Write Waveform
      - Use Initial Waveform dt
  - Handshake
  - Change Detection
  - On Demand
  - Implicit
  - More
  - Advanced
- DAQmx Timing Source
- DAQmx Trigger
- DAQmx Watchdog
- DAQmx Write

Product DocumentationNI-DAQmx Properties...NI-DAQmx PropertiesDAQmx TimingSample Clock:Write Waveform:Use Initial Waveform dt Property

Table of Contents

Sample Clock:Write Waveform:Use Initial Waveform dt Property

Download PDF

Updated2023-02-21
1 minute(s) read

Short Name: SampClk.WriteWfm.UseInitialWfmDT

Property of DAQmx Timing

Specifies that the value of SampClk.Rate will be determined by the dt component of the initial DAQmx Write waveform input for Output tasks.

Remarks

The following table lists the characteristics of this property.

Permissions	read/write
Resettable	yes
Settable while task is running	device-specific
Available in Run-Time Engine	yes

In This Section

Remarks

Was this information helpful?

Previous

Enable

Next

Delay After Transfer

Previous

Enable

Next

Delay After Transfer

Log in to get a better experience