I/O Type:Counter Input:Measurement Types Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: CI.MeasTypes
Property of DAQmx Device
Indicates the measurement types supported by the physical channels of the device. Refer to CI.MeasTypes for information on specific channels.
| Count Edges (10125) | Count edges of a digital signal. |
| Frequency (10179) | Measure the frequency of a digital signal. |
| Period (10256) | Measure the period of a digital signal. |
| Two Edge Separation (10267) | Measure time between edges of two digital signals. |
| Semi Period (10289) | Measure the time between state transitions of a digital signal. |
| Pulse Width (10359) | Measure the width of a pulse of a digital signal. |
| Position:Angular Encoder (10360) | Angular position measurement using an angular encoder. |
| Position:Linear Encoder (10361) | Linear position measurement using a linear encoder. |
| GPS Timestamp (10362) | Timestamp measurement, synchronizing the counter to a GPS receiver. |
| Pulse Frequency (15864) | Pulse measurement, returning the result as frequency and duty cycle. |
| Pulse Time (15865) | Pulse measurement, returning the result as high time and low time. |
| Pulse Ticks (15866) | Pulse measurement, returning the result as high ticks and low ticks. |
| Duty Cycle (16070) | Measure the duty cycle of a digital signal. |
| Velocity:Angular Encoder (16078) | Angular velocity measurement using an angular encoder. |
| Velocity:Linear Encoder (16079) | Linear velocity measurement using a linear encoder. |
Remarks
The following table lists the characteristics of this property.
| Permissions | read only |
| Resettable | no |
| Settable while task is running | device-specific |
| Available in Run-Time Engine | yes |