Counter Input >> Count Edges >> Count Direction >> Input >> Hysteresis
- Updated2023-03-16
- 1 minute(s) read
| Data Type: | float64 |
| Description: | Specifies a hysteresis level applied to the Threshold Level. The source signal must fall below Threshold Level minus the hysteresis before a change in count direction occurs. |
You can get/set/reset this property using:
DAQmxGetCICountEdgesCountDirHyst
DAQmxSetCICountEdgesCountDirHyst
DAQmxResetCICountEdgesCountDirHyst