Counter Input >> Count Edges >> Count Direction >> Input >> Threshold Level
- Updated2023-03-16
- 1 minute(s) read
| Data Type: | float64 |
| Description: | Specifies the voltage level applied to the Count Direction terminal. When the signal is above this threshold, the counter counts up. When the signal is below this threshold, the counter counts down. |
You can get/set/reset this property using:
DAQmxGetCICountEdgesCountDirThreshVoltage
DAQmxSetCICountEdgesCountDirThreshVoltage
DAQmxResetCICountEdgesCountDirThreshVoltage