IviUpconverter Configure Pulse Modulation Enabled [PULM]
- Updated2023-02-24
- 2 minute(s) read
IviUpconverter Configure Pulse Modulation Enabled [PULM]
IviUpconverterModulatePulse Capability Group
This VI configures the upconverter to apply pulse modulation to the RF output signal.
![IviUpconverter Configure Pulse Modulation Enabled [PULM].vi](https://docs-be.ni.com/bundle/ivi-compliance-package/page/lvivi/iviupconverter_configure_pulse_modulation_enabled_[pulm]c.gif?_LANG=enus)
 |
instrument handle The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
pulse modulation enabled (False) Enables or disables pulse modulation of the RF output signal. The driver uses this value to set the IviUpconverter Pulse Modulation Enabled [PULM] property.
Default Value: FALSE |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |