Introduction
- Updated2023-02-17
- 7 minute(s) read
Introduction
Physical Characteristics
To clean the IC-3171, wipe it with a dry towel.
Dimensions | 17.4 cm × 9.3 cm × 16.8 cm (6.9 in × 3.7 in × 6.6 in) |
Weight | 3.039 kg (6 lbs, 11 oz) |
Processor
Type | Intel Celeron 3765U |
Base frequency | 1.9 GHz |
Maximum frequency | 1.9 GHz |
On-die cache | 2 MB |
Operating System
Supported Operating Systems | NI Linux Real-Time 64-bit, Windows Embedded Standard 7 64-bit |
Memory
| |||||||||
|
Power Requirements
| |||||||
| |||||||
User-replaceable battery | 3V BR2032 lithium-carbon monofluoride coin cell, rated to 85 °C |
Reconfigurable FPGA
Type | Xilinx Kintex -7 XC7K160T |
Number of flip-flops | 202,800 |
Number of 6-input LUTs | 101,400 |
Number of DSP48E1 slices (18 × 25 multipliers) | 600 |
Embedded block RAM | 11,700 |
Number of DMA channels | 32 |
Number of logical interrupts | 32 |
Network Port
Standard | IEEE 802.3 Ethernet, 10BASE-T, 100BASE-TX, 1000BASE-T |
Interface | RJ45 |
Speed | 10, 100, 1000 Mbps |
PoE-Capable Network Ports
Number of ports | 4 |
Standards | IEEE 802.3 Ethernet, 10BASE-T, 100BASE-TX, 100BASE-T, IEEE 802.3af (PoE) compatible |
Interface | RJ45 |
Speed | 10, 100, 1000 Mbps |
Supported PoE power classes | 0, 1, 2, 3 |
PoE power output (per port) | 15.4 W |
Recommended port for IEEE 1588 grandmaster connection | PoE1 |
USB 3.0 Ports
Number of ports | 2 |
Type | USB 3.0, SuperSpeed |
Speed | 5 GB/s |
Maximum current | 900 mA, per port |
USB 2.0 Ports
Number of ports | 4 |
Type | USB 2.0, Hi-Speed |
Speed | 480 Mbit/s |
Maximum current | 1 A, shared across each pair of ports |
DisplayPort
Number of ports | 2 |
Maximum resolution | 3840 × 2160 at 60 Hz |
RS-485/422/232 Serial Port
Interface | RJ50 |
Maximum baud rate | 115,200 bps |
Data bits | 5, 6, 7, 8 |
Stop bits | 1, 1.5, 2 |
Parity | Odd, Even, Mark, Space |
Flow control | None |
Wire mode | 4-wire, 2-wire, 2-wire auto |
TTL Inputs/Outputs
Number of channels | 8 | ||||||||||
Type | Bidirectional | ||||||||||
Output voltage range | 0 V to 5 V | ||||||||||
Maximum pulse rate | 2 MHz | ||||||||||
Minimum pulse detected | 500 ns | ||||||||||
Power-on state | Input (high-impedance), 10 kΩ pull-up to 5 V | ||||||||||
|
Differential Inputs/Outputs
Number of channels | 2 | ||||||
Types | Bidirectional RS-422/RS-485 or single-ended input | ||||||
Maximum pulse rate | 5 MHz, differential | ||||||
Differential input threshold | ±200 mV | ||||||
Differential output voltage | 2.0 V min (RLOAD = 100 Ω, RS-422) | ||||||
Input voltage range | 0 V to 5.5 V | ||||||
|
Isolated Inputs
Type | Current sinking | ||||||||||
Number of channels | 8 | ||||||||||
| |||||||||||
Maximum pulse rate | 100 kHz | ||||||||||
Minimum pulse detected | 10 µs | ||||||||||
|
Isolated Outputs
Type | Current sourcing | ||||||||||||||
Number of channels | 8 | ||||||||||||||
| |||||||||||||||
| |||||||||||||||
|
Environmental
Indoor use only.
Ingress protection (IEC 60529) | IP20 | ||||||
| |||||||
Operating humidity (IEC 60068-2-56) | 10% RH to 90% RH, noncondensing | ||||||
Storage humidity (IEC 60068-2-56) | 5% RH to 95% RH, noncondensing | ||||||
Pollution degree (IEC 60664) | 2 | ||||||
Maximum Altitude | 2,000 m | ||||||
Operating shock (IEC 60068-2-27) | 50 g, 3 ms half sine, 3 shocks per side 30 g, 11 ms half sine, 3 shocks per side | ||||||
|
Safety
This product is designed to meet the requirements of the following electrical equipment safety standards for measurement, control, and laboratory use:
- IEC 61010-1, EN 61010-1
- UL 61010-1, CSA 61010-1
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment for measurement, control, and laboratory use:
- EN 61326-1 (IEC 61326-1): Class A emissions; Industrial immunity
- EN 55011 (CISPR 11): Group 1, Class A emissions
- EN 55022 (CISPR 22): Class A emissions
- EN 55024 (CISPR 24): Immunity
- AS/NZS CISPR 11: Group 1, Class A emissions
- AS/NZS CISPR 22: Class A emissions
- FCC 47 CFR Part 15B: Class A emissions
- ICES-001: Class A emissions
CE Compliance
This product meets the essential requirements of applicable European Directives, as follows:
- 2014/35/EU; Low-Voltage Directive (safety)
- 2014/30/EU; Electromagnetic Compatibility Directive (EMC)
Product Certifications and Declarations
Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for NI products, visit ni.com/product-certifications, search by model number, and click the appropriate link.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial to the environment and to NI customers.
For additional environmental information, refer to the Engineering a Healthy Planet web page at ni.com/environment. This page contains the environmental regulations and directives with which NI complies, as well as other environmental information not included in this document.
EU and UK Customers
Battery Replacement and Disposal
电子信息产品污染控制管理办法(中国RoHS)
Where to Go Next
The following documents and resources contain information you may find helpful as you use the IC-3171 in an application. Refer to the National Instruments Product Manuals Library at http://www.ni.com/manuals for the most recent versions of product documentation.
- IC-317x Getting Started Guide —Explains how to install and configure the device.
- IC-317x User Manual —Contains connector pinouts, configuration information, mounting information, and answers to common troubleshooting questions.
- NI CVS I/O Accessory User Manual —Contains installation and operation instructions for the CVS I/O Accessory.
NI Services
Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples.
Visit ni.com/services to learn about NI service offerings such as calibration options, repair, and replacement.
Visit ni.com/register to register your NI product. Product registration facilitates technical support and ensures that you receive important information updates from NI.
NI corporate headquarters is located at 11500 N Mopac Expwy, Austin, TX, 78759-3504, USA.
In This Section
- Physical Characteristics
- Processor
- Operating System
- Memory
- Power Requirements
- Reconfigurable FPGA
- Network Port
- PoE-Capable Network Ports
- USB 3.0 Ports
- USB 2.0 Ports
- DisplayPort
- RS-485/422/232 Serial Port
- TTL Inputs/Outputs
- Differential Inputs/Outputs
- Isolated Inputs
- Isolated Outputs
- Environmental
- Safety
- Electromagnetic Compatibility
- CE Compliance
- Product Certifications and Declarations
- Environmental Management
- EU and UK Customers
- Battery Replacement and Disposal
- 电子信息产品污染控制管理办法(中国RoHS)
- Where to Go Next
- NI Services