Ethernet Topology
- Updated2024-12-10
- 1 minute(s) read
Ethernet Topology
Learn about the Ethernet connections between the ETX-1620x rack I/O panel, PXIe controller, rack control unit (RCU), MOXA switch, and other components.
Note Ethernet ports in the MOXA switch that are not depicted in the block diagram are
unused.
Note When Ethernet connections go through the MOXA switch, the
connection speed is limited to 10/100BaseTX.
The following table describes the IP addresses the system expects for its internal devices. Using different IP addresses may cause issues with Maintenance Software and composite instrument drivers. Unless otherwise specified, the expected subnet mask is 255.255.0.0.
Device | Assigned IP Address | Resource Name |
---|---|---|
PXI controller secondary port | 169.254.160.2 | User-specified |
RCU port 1 | 169.254.160.9 | RCU |
RMX-41041 DC power supply | 169.254.160.21 | RMX_PPS1 |
Pulser charge supply RMX-41011 | 169.254.160.70 | PULSER_CHARGE_PPS1 |
Pulser ELoad PEL-3111 | 169.254.160.72 | PULSER_ELOAD1 |
Pulser bias supply RMX-4122 | 169.254.160.74 | PULSER_BIAS_PPS1 |
Isolation monitor iso685-D | 169.254.160.100 | INSULATION_MONITOR1 |
EA-PS 11500-30 | 169.254.160.65 | HP_PPS1 |