cRIO-9805 Specifications

Definitions

Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty.

Characteristics describe values that are relevant to the use of the model under stated operating conditions but are not covered by the model warranty.

  • Typical specifications describe the performance met by a majority of models.
  • Nominal specifications describe an attribute that is based on design, conformance testing, or supplemental testing.

Specifications are Typical unless otherwise noted.

Conditions

Specifications are valid for -40 °C to 70 °C unless otherwise noted.

Network Interface

Network ports used

TCP:830 (configuration only)

TCP:2537 (configuration only)

UDP:5353 (configuration only)

TCP:5353 (configuration only)

UDP:7865 (configuration only)

UDP:8463 (configuration only)

Network IP configuration

DHCP + Link-Local

Ethernet

Number of ports

4 ports, internally switched[1]1 This allows for line topologies or network redundancy.

Network interface

1000 Base-TX, full-duplex

1000 Base-TX,half-duplex

100 Base-TX, full-duplex

100 Base-TX, half-duplex

10 Base-T, full-duplex

10 Base-T, half-duplex

Communication rates

10/100/1000 Mbps, auto-negotiated

Maximum cabling distance

100 m/segment

Maximum hops per line

15

Timing and Synchronization

Protocol

IEEE 802.1AS for network synchronization over 1000 Base-TX, full-duplex

Network synchronization accuracy

<1 μs

Network synchronization accuracy with optimized configuration

<100 ns

Power Requirements

Maximum power consumption

5 W

Power supply voltage

9 V to 30 V

Power connector wiring

Power wire gauge[2]2 NI recommends using ferrules for stranded wires.

0.20 mm2 to 1.31 mm2 (24 AWG to 16 AWG)

Torque for screw terminals

0.20 N · m to 0.25 N · m (1.8 lb · in. to 2.2 lb · in.)

Power connector securement

Securement type

Screw flanges provided

Torque for screw flanges

0.20 N · m to 0.25 N · m (1.8 lb · in. to 2.2 lb · in.)

Physical Characteristics

Tip For two-dimensional drawings and three-dimensional models of the cRIO-9805, visit ni.com/dimensions and search by module number.

Weight

406 g (14.3 oz)

Dimensions

30.0 mm × 88.1 mm × 106.9 mm (1.18 in. × 3.47 in. × 4.21 in.)

Environmental Characteristics

Temperature and Humidity

Temperature

Operating

-40 °C to 70 °C

Storage

-40 °C to 85 °C

Humidity

Operating

10% RH to 90% RH, noncondensing

Storage

5% RH to 95% RH, noncondensing

Ingress protection

IP40

Pollution Degree

2

Maximum altitude

5,000 m

Shock and Vibration

Operating vibration

Random

5 g RMS, 10 Hz to 500 Hz

Sinusoidal

5 g, 10 Hz to 500 Hz

Operating shock

30 g, 11 ms half sine; 50 g, 3 ms half sine; 18 shocks at 6 orientations

1 This allows for line topologies or network redundancy.

2 NI recommends using ferrules for stranded wires.