cRIO-9803 Specifications

Definitions

Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty.

Characteristics describe values that are relevant to the use of the model under stated operating conditions but are not covered by the model warranty.

  • Typical specifications describe the performance met by a majority of models.
  • Nominal specifications describe an attribute that is based on design, conformance testing, or supplemental testing.

Specifications are Typical unless otherwise noted.

Conditions

Specifications are valid for -40 °C to 70 °C unless otherwise noted.

Software

Supported operating system

NI Linux Real-Time (64-bit), Windows

USB Ports

Type

USB type-C, upward-facing (device) port

USB interface

USB 3.1 Gen1, SuperSpeed

Maximum data rate

5 Gb/s

Maximum current from USB downward-facing (host) port

900 mA

Memory

Nonvolatile (SSD)

Varies

Note Visit ni.com/info and enter the Info Code ssdbp for information about the life span of the nonvolatile memory and about best practices for using nonvolatile memory.

Form factor

mSATA, full size

Maximum supported drive power

2.9 W (875 mA @ 3.3 V)

Drive interface

SATA II

Read/write performance (sequential)[1]1 Drive performance is dependent on operating system, file system, and application.

150 MB/s

Table 1. Module Drive Specifications
Drive Specification Kit Part Number
785920-01 786677-01
Drive capacity 64 GB 480 GB
Flash technology Planar SLC NAND Planar MLC NAND
Endurance JESD218A Enterprise workload 733 TBW 259 TBW
100% sequential workload 6,209 TBW 1,417 TBW
Note These specifications are typical at 40 °C operating and storage temperature according to JESD218A and JESD219. Visit ni.com/info and enter the Info Code ssdtemp for more information about the impact of temperature on flash endurance.

Power Requirements

Maximum power consumption

4.5 W (900 mA @ 5 V)

Power source

USB bus-powered

Physical Characteristics

Tip For two-dimensional drawings and three-dimensional models of the cRIO-9803, visit ni.com/dimensions and search by module number.

Weight

370 g (13 oz)

Dimensions

30.0 mm × 88.1 mm × 106.9 mm (1.18 in. × 3.47 in. × 4.21 in.)

Environmental Characteristics

Temperature and Humidity

Temperature[2]2 Drive utilization at extreme temperatures may limit storage duration over time. NI recommends the use of SLC based drives for operating and storage environments above 40 °C. Visit ni.com/r/ssdtemp for more information about the impact of temperature on drive endurance.

Operating

-40 °C to 70 °C

Storage

-40 °C to 85 °C

Humidity

Operating

10% RH to 90% RH, noncondensing

Storage

5% RH to 95% RH, noncondensing

Ingress protection

IP40

Pollution Degree

2

Maximum altitude

5,000 m

Shock and Vibration

Operating vibration

Random

5 g RMS, 10 Hz to 500 Hz

Sinusoidal

5 g, 10 Hz to 500 Hz

Operating shock

30 g, 11 ms half sine; 50 g, 3 ms half sine; 18 shocks at 6 orientations

1 Drive performance is dependent on operating system, file system, and application.

2 Drive utilization at extreme temperatures may limit storage duration over time. NI recommends the use of SLC based drives for operating and storage environments above 40 °C. Visit ni.com/r/ssdtemp for more information about the impact of temperature on drive endurance.