Installing Software on the Host Computer

Before using the cRIO-903x, you must install the following application software and device drivers on the host computer in this order:

Sequence Software
1 LabVIEW
2 LabVIEW Real-Time Module
3 LabVIEW FPGA Module (see note)
4 NI CompactRIO and Drivers
Note LabVIEW FPGA Module is not required when using Scan Interface mode. To program the user-accessible FPGA on the cRIO-903x, LabVIEW FPGA Module is required.

For minimum software support information for your controller and C Series modules, visit ni.com/info and enter the Info Code swsupport.