You will need these items to set up your cDAQ chassis.

Figure 4. Installation Supply List
  1. Host Computer Running Windows
  2. Application Software, such as LabVIEW, if not already installed
  3. NI-DAQmx Driver
  4. cDAQ-9189 Chassis
  5. C Series Module(s)
  6. Shielded Category 5 Ethernet Cable
  7. Power Supply or Power Connector
  8. External Power Supply (if using the power connector instead of the included power supply)
Note Check the NI-DAQmx driver and application software release notes for specific version compatibility with your host computer.
Note You can either use a shielded straight-through Category 5 Ethernet cable or an Ethernet crossover cable to connect the cDAQ chassis directly to your computer.
Note When operating the cDAQ chassis in hazardous locations, you must use the power connector with an external power supply rated for hazardous locations. The power supply included in the cDAQ chassis kit is intended only for desktop use. For all other applications use the included 2-position power connector plug and a power supply rated for your application power requirements. Visit ni.com to find hazardous locations-certified power supplies.
Note When operating the cDAQ chassis in temperatures below 0 °C, you must use the PS-15 power supply or another power supply rated for below 0 °C.