Filtered Results
Clear All
Showing 1 - 10 of 30 results
How to Setup WLAN 2*2 MIMO Configuration With WLAN Toolkit

RFmx software is not support WLAN MIMO test until now, NI only provide the WIFI Toolkit to support the WLAN MIMO test. WIFI Toolkit was including the WLAN Generation Software Front Panel and WLAN Analysis ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YNw1CAG&l=en-US
NI RFSA and RFSG Timeout Occurred While Waiting for a Response From the Instrument FIFO

Using instrument NI PXIe-5840 through RFSA/RFSG soft front panels or LabVIEW, the Initilize.vi timeouts and the instrument cannot be used. When debugging with NI I/O trace the specific error is following: ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001DpRDCA0&l=en-US
The Issue of Excessive FPGA Temperatures in VST

I am using the Vector Signal Transceiver (VST) PXIe-5840, and during my use, I encountered an FPGA temperature issue. See figure below:

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YSVACA4&l=en-US
EVM Measurements Using NI RFmx

This article provides some general information about EVM measurements using some of the RFmx personalities where it is available and includes a step by step instructions on how to take an EVM measurement ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q0000019g6XCAQ&l=en-US
Finding the Calibration Interval for an NI Device

This article provides guidance on how often NI devices need to be calibrated and how to find the specific calibration interval for individual Multifunction I/O DAQ, Digital Instruments, High-Speed Digital ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000x1xHCAQ&l=en-US
Error -373634 When Acquiring a Signal Through PXIe 5644R VST

I am trying to generate a signal from my PXIe 5644R module using the RFSG examples in LabVIEW, but I receive the following error: Error -373634:Output generation has been aborted by the reverse power ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000x5I8CAI&l=en-US
Script Trigger Support for PXIe-5830

I was trying to use C# example (User>>Public>>Public Documents>>National Instruments>>NI-RFSG>>Example>>VS2012>>Triggers>>ScriptTrigger-SoftwareSource). It worked under another PC, but itdoesn't work now, ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001Dp9xCAC&l=en-US
PLL Could not Phase-Lock to the External Reference Clock

I'm trying to open an RFSA or RFmx session with my NI vector signal analyzer (or vector signal transceiver), but I receive the error -1074118630 or error -1074097950when I open it using either LabVIEW ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019NPzSAM&l=en-US
Vector Signal Transceivers (VST) Single Tone Generation: Fluctuations on Power Levels Generated by the Signal Generator

We're using VST to generate CW RF signals at a specific power level, and frequency using the NI RFSG example namedRFSG Getting Started Singe Tone Generation.vi. Upon capturing the output of the VST, there ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000g0CuSAI&l=en-US
What Are The Commonly Used In RF Unit Conversion Formula?

What are the commonly used in RF unit conversion formula?

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000ow2XCAQ&l=en-US
010203
Showing 1 - 10 of 30 results
1of 3 pages

We want to hear about your experience!

If you didn't find what you needed or have other feedback, we'd love to learn how we can improve. Please schedule time to talk with us or provide written feedback here.