From Saturday, Nov 23rd 7:00 PM CST - Sunday, Nov 24th 7:45 AM CST, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Saturday, Nov 23rd 7:00 PM CST - Sunday, Nov 24th 7:45 AM CST, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
October 2021
This file contains late breaking news about FlexRIO and supersedes any information found in other documentation included in the distribution.
Refer to NI Linux Technology for the most recent information about Linux support at National Instruments.
Refer to FlexRIO Release Notes for known issues, bugs fixed since the last release, and other release details.
FlexRIO software for the Linux has been tested on the following distributions:
FlexRIO requires a 64-bit distribution and does not support 32-bit applications.
FlexRIO 21.3 for Linux supports the following hardware models:
FlexRIO Coprocessors
FlexRIO Digitizers
FlexRIO Signal Generators
FlexRIO IF Transceivers
FlexRIO High-Speed Serial Modules
FlexRIO FPGA Modules
FlexRIO Adapter Modules
FlexRIO FPD-Link Interface Modules
FlexRIO GMSL Interface Modules
NI provides a repository add-on for all supported drivers that you can install using your Linux distribution's native package manager.
After the driver packages are installed, you must rebuild the new packages for the system kernel. NI recommends that you run the command 'dkms autoinstall' after installation, and before rebooting the system, to install the latest revision of all modules that have been installed for other kernel revisions. After doing so, the installed device drivers will function immediately on the next system start.
You must begin development on a computer running Windows.
To find the FlexRIO device you are using in your application, use the command 'lsni -v' to list information on all National Instruments devices in the system.
Some features discussed in the FlexRIO documentation are unavailable on Linux.
The following FlexRIO driver features supported for Windows are not supported for Linux.
You must compile a bitfile using LabVIEW FPGA on a Windows machine. Refer to the "Using the FlexRIO Driver and FPGA Interface C API" section for more information.
© 2008–2021 National Instruments Corporation. All rights reserved.
This publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Notices are located in the /usr/share/doc/NOTICES directory EULAs are located in the /usr/share/ni/licenses directory
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering the NI products/technology, refer to the NI Patent Notice at .
378681A-01